Welding: Difference between revisions
From GummyCarbs
| Line 12: | Line 12: | ||
* [https://www.globaltecheng.com/ Global Tech Engineering] sells stainless elbows at a reasonable price. (e.g. [https://www.globaltecheng.com/productcart/pc/viewPrd.asp?idcategory=0&idproduct=3350 1.5" 304 stainless 45-degree elbow, 7.5" length, $5.65]) | * [https://www.globaltecheng.com/ Global Tech Engineering] sells stainless elbows at a reasonable price. (e.g. [https://www.globaltecheng.com/productcart/pc/viewPrd.asp?idcategory=0&idproduct=3350 1.5" 304 stainless 45-degree elbow, 7.5" length, $5.65]) | ||
===Materials=== | |||
[http://www.eng-tips.com/viewthread.cfm?qid=153619&page=7 This thread] states that most exhaust headers are made of 304 stainless, but the poster suggests 304l or 321/347 instead. | |||
Revision as of 06:42, 11 November 2008
Exhausts
Material
Once source mentions 14-gauge stainless steel.
Joints
Hooker Headers makes "Hooker Headers Alignment Weld Sleeves". These can be used to more easily align and butt-weld two sections of tubing (found in this Street Shopper article).
Tubing
- Global Tech Engineering sells stainless elbows at a reasonable price. (e.g. 1.5" 304 stainless 45-degree elbow, 7.5" length, $5.65)
Materials
This thread states that most exhaust headers are made of 304 stainless, but the poster suggests 304l or 321/347 instead.