Actions

Electrical Regulators: Difference between revisions

From GummyCarbs

Jeff (talk | contribs)
New page: =Resources= *[http://www.seetron.com/an_vpwr1.htm This page] (seetron) has a diagram from Nuts & Volts magazine for a 5V regulator.
 
Jeff (talk | contribs)
No edit summary
 
Line 1: Line 1:
=Dirty Power=
<blockquote>DEADLY DAN WAS RIGHT..USE A 3 LEGED 5 VOLT RECULATOR CHIP.
NEXT USE AT LEST 1000MFD ELECTRLITIC CAP RATED AT 50VOLTS AND UP.
USE A 103MFD CERAMIC CAP DIRECTLY IN FRONT OF THE 5VOLT CHIP.
AQFTER THAT. IE: PIN 1 AND PIN 3. ALLSO USE A BRIDGE RECTIFIR IN FRONT OF
THE 1000MFD CAP.THIS WILL GIVE YOU AN AMMONT OF SAFTY IN CASE THE
ALTERNATOR DIODES GO BAD.CARS EXPERENCE VOLTAGE SPIKES ALL THE
TIME. RADIOS..AC OR HEATER.FLASHERS.DOME LIGHTS TURN SIGNES
IF YOU NEED A CORRECT CIRCUIT LET ME KNOW I HAVE OVER 10,000
CIRCUITS IN ANY APPLICATION</blockquote> ([http://www.instructables.com/id/How-To-Make-Your-Own-USB-Car-Charger-For-Any-iPod-/ source])


=Resources=
=Resources=
*[http://www.seetron.com/an_vpwr1.htm This page] (seetron) has a diagram from Nuts & Volts magazine for a 5V regulator.
*[http://www.seetron.com/an_vpwr1.htm This page] (seetron) has a diagram from Nuts & Volts magazine for a 5V regulator.

Latest revision as of 22:56, 27 November 2007

Dirty Power

DEADLY DAN WAS RIGHT..USE A 3 LEGED 5 VOLT RECULATOR CHIP.

NEXT USE AT LEST 1000MFD ELECTRLITIC CAP RATED AT 50VOLTS AND UP. USE A 103MFD CERAMIC CAP DIRECTLY IN FRONT OF THE 5VOLT CHIP. AQFTER THAT. IE: PIN 1 AND PIN 3. ALLSO USE A BRIDGE RECTIFIR IN FRONT OF THE 1000MFD CAP.THIS WILL GIVE YOU AN AMMONT OF SAFTY IN CASE THE ALTERNATOR DIODES GO BAD.CARS EXPERENCE VOLTAGE SPIKES ALL THE TIME. RADIOS..AC OR HEATER.FLASHERS.DOME LIGHTS TURN SIGNES IF YOU NEED A CORRECT CIRCUIT LET ME KNOW I HAVE OVER 10,000

CIRCUITS IN ANY APPLICATION

(source)

Resources

  • This page (seetron) has a diagram from Nuts & Volts magazine for a 5V regulator.