Composites: Difference between revisions
From GummyCarbs
| Line 14: | Line 14: | ||
* [http://www.charlesriverrc.org/articles/foam_vac/scobiepuchtler_simplebaggingsys.htm Simple Vacuum Bagging Systems] recommends using a cheap hand-pump vacuum pump from an auto parts store. They have a built-in vacuum gauge. | * [http://www.charlesriverrc.org/articles/foam_vac/scobiepuchtler_simplebaggingsys.htm Simple Vacuum Bagging Systems] recommends using a cheap hand-pump vacuum pump from an auto parts store. They have a built-in vacuum gauge. | ||
* [http://joewoodworker.com/ JoeWoodWorker.com] has some excellent guides intended for applying veneers to woods. | |||
** [http://joewoodworker.com/docs/ProjectEVS.pdf Project EVS] is a how-to guide for building a very advanced vacuum system for a relatively low cost. | |||
*** Uses two vacuum reservoirs made of Schedule 40 or 80, solid-core PVC pipe. Just as an air tank prevents an air compressor from having to run continuously, a vacuum reservoir reduces the strain on a vacuum pump. | |||
*** Uses a vacuum controller to switch the vacuum pump on only when additional vacuum is needed. | |||
*** Uses a "3-way Mac Valve" to relieve vacuum from the vacuum pump, which otherwise might prevent it from re-starting after cycling off. | |||
Revision as of 20:18, 9 May 2010
Material Selection
Google's cache of the now-defunct www.pe.net/~rpm/about2.htm mentions:
- All gas tanks are made of vinyl ester resin for chemical resistance to gasoline.
- Fenders and side plates are made of iso-flex or DCPD resins, no low grade ortho resins are used.
- All parts are made with iso-flex gel coats to reduce cracking.
Vacuum Bagging
- Vacuum Bagging On $50
- Glad ForceFlex trash bags are polyethylene and are suitable for vacuum bagging with epoxy.
- Vacuum Bagging Basics is a good overview from a boating perspective.
- Simple Vacuum Bagging Systems recommends using a cheap hand-pump vacuum pump from an auto parts store. They have a built-in vacuum gauge.
- JoeWoodWorker.com has some excellent guides intended for applying veneers to woods.
- Project EVS is a how-to guide for building a very advanced vacuum system for a relatively low cost.
- Uses two vacuum reservoirs made of Schedule 40 or 80, solid-core PVC pipe. Just as an air tank prevents an air compressor from having to run continuously, a vacuum reservoir reduces the strain on a vacuum pump.
- Uses a vacuum controller to switch the vacuum pump on only when additional vacuum is needed.
- Uses a "3-way Mac Valve" to relieve vacuum from the vacuum pump, which otherwise might prevent it from re-starting after cycling off.
- Project EVS is a how-to guide for building a very advanced vacuum system for a relatively low cost.