|
|
| (9 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| See http://www.ta-deti.de/ta/ for thorough technical information.
| | Content deprecated. Proceed [[Honda Transalp XL600V|here]]. |
| | |
| =Modifications=
| |
| ==Africa Twin Parts==
| |
| Many parts from the XRV750 (RD04) and XRV650 (RD03) Africa Twins are interchangeable with the Transalp. [http://www.bbb-bike.com/history/honda/africatwin/ This page] (Japanese) has a full history of the Africa Twin.
| |
| | |
| ===Fuel Tank===
| |
| RD03 and RD04 fuel tanks (identical other than color scheme) fit the Transalp frame. According to [http://www.advrider.com/forums/showthread.php?t=39170&page=136 this page], "the left AT petcock is the same as the petcock for a 1990 NT650 Honda Hawk" ([http://houseofmotorcycles.bikebandit.com/honda-motorcycle-nt650-hawk-gt-1990/o/m2452 $55 at BikeBandit.com]).
| |
| | |
| ====Interference====
| |
| The RD03/RD04 tank's petcocks may interfere with the Transalp engine.
| |
| | |
| [http://www.advrider.com/forums/showpost.php?p=5853492&postcount=3016 Blackbert says] that the right-hand petcock hits the clutch cable mount, and the left-hand petcock hits the coolant line. The right petcock is larger due to a drain plug, so swapping it fixes the clearance problem on the right-hand side, but leaves the left side unfixed.
| |
| | |
| [http://www.advrider.com/forums/showpost.php?p=5854010&postcount=3018 Ladder106 replies] that the Africa Twin tank requires a support, which is shown [http://img.photobucket.com/albums/v236/241880/RD04060.jpg here].
| |
| | |
| ==Swingarm==
| |
| The Africa Twin has an aluminum swingarm which is is longer than the steel Transalp swingarm. It can be fitting with relatively few problems. Notably, the drum brake stopper has to be ground to fit the Africa Twin swingarm (assuming an Africa Twin disc rear wheel hasn't been used as well), and a 124 link chain is needed.
| |
| | |
| *[http://google.com/translate?u=http%3A%2F%2Fwww.transalp.de%2Ftechnik%2Fpd-technik%2Fumbauten%2Fat-schwinge.php&langpair=de%7Cen&hl=en&ie=UTF8 Translated "Transalp with Africa Twin swingarm"] (from transalp.de).
| |
| | |
| [[Image:RD04_Dogbones_Interchangeability.png]]
| |
| [[Image:RD04_Swingarm_Interchangeability.png]]
| |
| | |
| ==Brakes==
| |
| *[http://members.aol.com/xr650rr/ XR650RR Super Motard] mentions a Braking oversized rotor kit on an XR650L (despite the XR650RR title).
| |
| * See [[Transalp Brakes]] for information.
| |
| | |
| =Exhaust=
| |
| | |
| ==GSXR-1000==
| |
| According to [http://www.advrider.com/forums/showthread.php?t=39170&page=195 this thread] (advrider.com), 2001 - 2004 GSXR1000 mufflers are a relatively easy add-on.
| |
| <blockquote>Not quite a direct bolt-on but close. I got two 15° bend stainless steel tubes from Burns Stainless and rotated them until I got the right angle. Then I made the flange to bolt on the muffler. I attached the muffler and then tacked the flange and the two sections in place. I'm not a welder so you won't see a close-up shot. I originally had a GSXR1000 muffler on because it was titanium. But when I put the bags and mounts on, the muffler was too big and in the way. So I swapped it out for a 750 or 600 unit, shorter but not titanium. Fortunately, it weighs the same due to the shorter length.</blockquote>
| |
| | |
| =Electrical=
| |
| | |
| ==Battery==
| |
| | |
| ===YTX14AH-BS===
| |
| According to [http://www.advrider.com/forums/showthread.php?t=39170&page=184 this thread], the stock lead-acid battery, YB12A-B, can be replaced with a sealed lead-acid battery, YTX14AH-BS. The only modification necessary is to remove the battery insulator sleeve.
| |
| | |
| ===NT650===
| |
| The [http://www.advrider.com/forums/showthread.php?t=39170&page=184 same thread] indicates that the sealed battery specified for a Hawk NT650V can be used on the Transalp, but it requires a 1/8" shim underneath and possible cutting of the battery sleeve.
| |
| | |
| =Accessories=
| |
| | |
| ==Luggage==
| |
| | |
| ===Racks===
| |
| *[http://www.happy-trail.com Happy Trails] makes aluminum panniers and steel luggage racks. Their mounting kits are also usable with GIVI and Pelican cases.
| |
| *[http://www.givi.it GIVI] offers topcase adapters which replace the plate on the Transalp's rear carrier. They also produce crashbars.
| |
| ** The E200 Monorack plate is available for 1988-1996 applications (note that the E211 may also be listed, but is for 1997-1998 applications):
| |
| *** [https://s.hostingprod.com/@www.midwestcycle.com/ssl/store/view_product.php?product=E200 Midwest Cycle Supply]
| |
| *** [http://store.azmusa.com/azmotorsports/common.html AZ Motorsports]
| |
| *** [http://www.happy-trail.com/productinfo.aspx?productid=154&categoryid=31&startpage=1 Happy Trails]
| |
| | |
| ===Cases===
| |
| | |
| ==Crashbars==
| |
| * The TN363 crash bars are available from [http://store.azmusa.com/azmotorsports/giencaguforh.html AZ Motorsports] and [http://happy-trail.com/productinfo.aspx?productid=162&categoryid=10&startpage=1 Happy Trail]. Mounting these to a US-spec Transalp requires longer bolts across the front and minor trimming of the bike's plastic radiator guard.
| |
| | |
| ==Misc==
| |
| * [http://www.old-site.africanqueens.de/home_e.htm African Queens] sells hard-core accessories.
| |
| | |
| =Resources=
| |
| * The great [http://www.advrider.com/forums/showthread.php?t=39170 "Show us your TransAlp modifications" thread] on ADVrider.com.
| |
| * [http://www.advrider.com/forums/showthread.php?t=134757 "Transalp Transformation"] on ADVrider.com (90k mile Transalp gets XR-L forks, a 30mm rear spacer, a custom dash, and ProTaper bars).
| |
Content deprecated. Proceed here.